Attendance device integration is available for Secom, ADT Caps, and S1 only.
You can record attendance in flex by integrating with these devices.
Please refer to the guides below for attendance device integration.
Please note the following for smooth device integration.
The server PC must remain on 24 hours a day. If it turns off, records cannot be transmitted to flex.
Real-time work tracking must be enabled in the work type settings to record attendance.
(View guide)In real-time work tracking settings, set the clock-out confirmation to "Skip."
If an approval is required at clock-out, a notification for approval will be sent via the app.
The clock-out record will only be saved properly once the approval request is processed.
Attendance is simply entered into flex and follows flex's attendance rules as-is.
Clock-in — The first clock-in time entered is recorded as the clock-in
Clock-out — The first clock-out time entered is recorded as the clock-out
Therefore, configure the device settings as follows:
Clock-in time — Set to automatic switching at a specific time period
Clock-out time — Manually select clock-out on the device, then enter fingerprint or card